Thermostatic Floater Steam Trap Type FT-14

Thermostatic Floater Steam Trap Type FT-14 Steam traps are used to prevent live steam from escaping through the lines.

All Brands

Favourites Add to favorites


Size: 1/2Inch to 1 Inch
Pressure rating: PN16/25 Class 125/150 /300
Temperature range: 220°Cto250°C


Function Thermostatic Floater Steam Trap Type FT14 Thermostatic Floater Steam Trap Type FT14
In steam line and its related equipment, steam creates condensate in effect of contacting with environment and exchange of heat .This condensate causes to water hammering in line and decrease temperature of system and because of this steam cannot move in tubes appropriately. To avoid mentioned problems and increase efficiency of system and also to transfer maximum thermal force, this condensate must be exited of the line immediately and guided to condensate tanks. Steam trap is useful device to do this .There is a ball inside the trap, condensate floats ball, a rod has been attached to ball and when the ball goes up, the rod moves a small shot, this shot gradually opens or closes the orifice depending on condensate measure and transient alterations dose not effect on it. This kind of steam trap is especially useful for those situations which producing condensate is permanent or too much, such as energy transfer systems like heat exchangers and coil containers and like these. This trap has a thermostat which conducts extra air and gases out of system and also this thermostat discharges of condensate if any damage is occurred for floating ball.    

Similar Products